The Hytrol Blog

Material handling insights. Industry trends. Hytrol news. Get it all on The Hytrol Blog.


      In today's Ask Hytrol, we're going to discuss how to upgrade your ProSort 400's switch to the latest configuration. First, remove the hex bolt on the rubber bushing mounting bracket. Disconnect the green airlines from the fittings on the cylinder. Loosen the jam nut on the cylinder rod so that the cylinder may unscrew from the rod end. Unscrew the rubber bushing from the cylinder's base. Once the old bushing is removed, add a drop of thread locker onto the new bushing stud and screw the st...
Ask Hytrol
      In the latest Ask Hytrol, we're going to discuss how to upgrade the ProSort 100's divert switch to the latest configuration. Following proper lock-out tag-out procedures, remove the divert from the unit. Detach the locknut from the vibration mount holding the cylinder mount to the switch plate. Remove the locknuts above the rod end so that the actuator assembly can be pulled out. Unplug the two green airlines. Discard the rubber bushing and mounting angle from the cylinder's end.
      In this Ask Hytrol post, we’re going to talk about how to use the Hytrol Toolbox app, a free app available to Integration Partners and End Users. This app was designed with the maintenance person in mind. With the Hytrol Toolbox app, you can view information about your conveyor, identify part numbers, select a quantity, and email your required list directly to your purchaser, Integration Partner, or Hytrol--all from your iOS, Android, Windows, or Kindle device.
      Importing a spare parts order into HEROES allows for electronic tracking for spare parts orders and removes the possibility of order duplication. Let’s talk about how to import this list from HyNet.
  Welcome to Ask Hytrol. Today, we're going to talk about reading EZLogic® LED indicator lights to determine zone status. The first step when troubleshooting an error on any Hytrol EZLogic® model of conveyor is to determine whether or not it is an EZLogic® problem.
Today, we’re going to talk about how to determine proper belt tension on a belted conveyor.
Today we’re going to talk about how to adjust the pneumatic tensioner on the ProSort SC.
      From time to time, you may need to replace slats or shoes on the ProSort 400.
  The plastic chain on the Connex™ AL series stretches naturally over time, and may need to be tensioned.
  Hytrol’s Aluminum Connex™ line has a quiet, modular design and is created for easy installation.
  Hytrol’s match mark decals signify how multiple conveyor units have been engineered for setup. They also have a printed QR code which references the Factory Order Number.